Advanced Multi Aperture Designer

IMPORTANT - PLEASE READ

Watch The Demo Video

This advanced designer includes minimal validation of the sizes entered. We recommend sketching out the layout and adding all the sizes, so you can calculate the position of the top corner of each aperture in relation to the top corner of the board.
You must follow these rules when designing a mount layout:

• The minimum border width is 20mm(25mm if selecting a double mount). This means the minimum size that can be entered in the Left or Top fields is 20mm(25mm).
• The minimum gap between any two apertures is 10mm(20mm if selecting a double mount).
• The maximum external size is 1118 X 815mm/815 X 1118mm